Industrial Water Softener

Sub Title: 
Our Industrial Water Softeners are designed to accommodate production flow rates

Our water softener can be fitted with 'Siata' or 'Fleck'  valves but if a more specialised system is required, we are able to provide you with the option of using Individual Valved manifolds - typically being Gemu 690 ABS N/C Valves.

As part of our service, we design a control system around your needs using PLC's and control devices that suit your site standards. All our units can be linked by modem or other means allowing us to monitor your system remotely and provide advice accordingly should assistance ever be required.

Water Softener Units

'Simplex' is a single vessel system:

All of the industrial softeners are controlled by volumetric Regen only. Once the water have been used the softener goes into regeneration. If a water bypass is not fitted, water can stop flowing to service while the softener is in regeneration.

Typical Application: Low Usage 'Boiler Feeds with Large Hotwells'

'Duplex' is a twin vessel system:

With the same application as the 'Simplex', once the programmed volume has been reached, the service unit that is exhausted goes immediately into regen. The additional vessel is on stand-by and automatically goes into service. This guarantees 24/7 soft water production. With this type of system, timings can be changed for convenience should water become poor during production hours.

Typical Application: Reverse Osmosis Feed Water

'Triplex' is a three vessel system:

This type of system is typically custom made to suit feed water conditions and the client’s water feed demands. The 'Triplex' has the ability to achieve high service flow rates should peak flow rates be required.

Also, system sensors monitor the flow rates and make 2 out of the 3 units come into service should demand be required too

Just like the 'Duplex' system, once the capacity has been reached, the exhausted unit goes into regeneration and the other two continue service.

Each unit has its own individual controls so they can run either on Manual or Automatic settings.

Typical Application: Food Manufacturers with 2 or more boiler feeds where soft water cleans production areas and work surfaces.

More Information: 

For more information on the
{product} provided by
ADEPT Pure Water Limited

Please  Call Us On:

+44 01933 677181

or Contact Us Online


Copyright © 2016 ADEPT Pure Water Limited |36 Huxley Close, Park Farm South, Wellingborough, Northants NN8 6AB | VAT REG: 986 5094 67